Adapter Sleeves With Inch Dimensions D1 1 3/4-4 3/16

Adapter sleeves are using for locating bearings with a tapered bore onto a cylindrical seating as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft. When adapter sleeves are used on smooth shafts, the bearing can be located at any position on the shaft. When used on stepped shafts, together with an abutment ring, bearings can be accurately positioned axially and bearing dismounting is also facilitated

Threads: American National Form NS Class 3

Adapter sleeves Designation

Dimensions							Mass	Designations
d1	d	d3	B1	B2	G nom.	No. of threads per in		Adapter sleeve with lock nut and locking device	Lock nut	Locking device	Appropriate hydraulic nut	bearings
in	mm	in					Kg
1 3/4	55	2 31/32	1.845	0.563	2.157	18	0.36	SNW 11×1 3/4	N10	W10	-	22211K,21311K
1 13/16	55	2 31/32	1.845	0.563	2.157	18	0.36	SNW 11×1 13/16	N10	W10	-	1211K,1311K,22211K,21311K
1 7/8	55	2 31/32	1.845	0.563	2.157	18	0.36	SNW 11×1 7/8	N11	W11		1211K,1311K,22211K,21311K
1 15/16	55	2 31/32	1.845	0.563	2.157	18	0.36	SNW 11×1 15/16	N11	W11	-	1211K,1311K,22211K,21311K
1 15/16	55	2 31/32	2.516	0.563	2.157	18	0.43	SNW111×1 15/16	N11	W11	-	2311K,22311K
2	55	2 31/32	1.845	0.563	2.157	18	0.36	SNW 11×1 2	N11	W11	-	1211K,1311K,22211K,21311K
2	55	2 31/32	2.516	0.563	2.157	18	0.43	SNW111×1 2	N11	W11	-	2311K,22311K
2	65	3 3/8	2.1	0.625	2.548	18	0.64	SNW 13×2	N13	W13	-	1213K,1313K,22213K
2 1/16	60	3 5×32	2.659	0.594	2.36	18	0.73	SNW 112×2 1/16	N12	W12	-	2312K,22312K
2 3/16	65	3 3/8	2.100	0.625	2.548	18	0.64	SNW 13×2 3/16	N13	W13	-	1213K,1313K,22213K
2 3/16	65	3 3/8	2.771	0.625	2.548	18	0.79	SNW 113×2 3/16	N13	W13	-	2313K,22313K
2 1/4	65	3 3/8	2.100	0.625	2.548	18	0.64	SNW 13×2 1/4	N13	W13	-	1213K,1313K,22213K
2 1/4	65	3 3/8	2.771	0.625	2.548	18	0.79	SNW 113×2 1/4	N13	W13	-	2313K,22313K
2 5/16	65	3 3/8	2.100	0.625	2.548	18	0.64	SNW 13×2 5/16	N13	W13	-	1213K,1313K,22213K
2 3/8	75	3 7/8	2.296	0.665	2.933	12	1	SNW 15×2 3/8	AN15	W15	-	1215K,1315K,22215K
2 7/16	75	3 7/8	2.296	0.665	2.933	12	1	SNW 15×2 7/16	AN15	W15	-	1215K,1315K,22215K
2 7/16	75	3 7/8	3.084	0.665	2.933	12	1.35	SNW115×2 7/16	AN15	W15	-	2315K,22315K
2 11/16	80	4 5/32	2.376	0.665	3.137	12	1.1	SNW 16×2 11/16	AN16	W16	-	1216K,1316K,22216K
2 11/16	80	4 5/32	3.204	0.665	3.137	12	1.45	SNW116×2 11/16	AN16	W16	-	2316K,22316K
2 3/4	80	4 5/32	2.376	0.665	3.137	12	1.1	SNW 16×2 3/4	AN16	W16	-	1216K,1316K
2 3/4	80	4 5/32	2.376	0.665	3.137	12	1.1	SNW 16×2 3/4	AN16	W16	-	22216K
2 15/16	85	4 13/32	2.486	0.697	3.34	12	1.3	SNW 17×2 15/16	AN17	W17	-	1217K,1317K,22217K
2 15/16	85	4 13/32	3.312	0.697	3.34	12	1.55	SNW 117×2 15/16	AN17	W17	-	2317K,22317K
3	85	4 13/32	2.486	0.697	3.34	12	1.3	SNW 17×3	AN17	W17	-	1217K,1317K,22217K
3	85	4 13/32	3.312	0.697	3.34	12	1.55	SNW 117×3	AN17	W17	-	2317K,22317K
3 3/16	90	4 21/32	2.646	0.782	3.527	12	1.4	SNW 18×3 3/16	AN17	W18	HMVC18	1218K,1318K,22218K
3 3/16	90	4 21/32	3.553	0.782	3.527	12	1.8	SNW 118×3 3/16	AN18	W18	HMVC18	1218K,1318K,22218K
3 1/4	90	4 21/32	2.646	0.782	3.527	12	1.4	SNW 18×3 1/4	AN17	W18	HMVC18	1218K,1318K,22218K
3 5/16	95	4 15/16	2.760	0.813	3.73	12	1.85	SNW119×3 5/16	AN19	W19	HMVC19	1219K,1319K,22219K
3 5/16	95	4 15/16	3.702	0.813	3.73	12	2.2	SNW119×3 5/16	AN19	W19	HMVC19	23219K,22319K
3 7/16	100	5 3/16	2.869	0.844	3.918	12	2	SNW 20×3 7/16	AN20	W20	HMVC20	1220K,1320K,22220K
3 7/16	100	5 3/16	3.971	0.844	3.918	12	2.2	SNW 120×3 7/16	AN20	W20	HMVC20	23220K,22320K
3 1/2	100	5 3/16	2.869	0.844	3.918	12	2	SNW 20×3 1/2	AN20	W20	HMVC20	1220K,1320K,22220K
3 1/2	100	5 3/16	3.971	0.844	3.918	12	2.2	SNW 120×3 1/2	AN20	W20	HMVC20	23220K,22320K
3 11/16	105	5 7/16	2.987	0.844	4.122	12	2.05	SNW 21×3 11/16	AN21	W21		1321K
3 11/16	110	5 23/32	3.206	0.906	4.325	12	2.25	SNW 22×3 11/16	AN22	W22	HMVC22	1222K,1322K,22222K
3 15/16	110	5 23/32	3.206	0.906	4.325	12	2.25	SNW 22×3 15/16	AN22	W22	HMVC22	1222K,1322K,22222K
3 15/16	110	5 23/32	4.348	0.906	4.325	12	2.95	SNW 122×3 15/16	AN22	W22	HMVC22	23222K,22322K
4	110	5 23/32	3.206	0.906	4.325	12	2.25	SNW 22×4	AN22	W22	HMVC22	1222K,1322K,22222K
4 3/16	120	5 11/16	2.947	0.938	4.716	12	2.8	SNW 3024×4 3/16	N024	W024	HMVC24	23024K

Adapter sleeves

Adapter sleeves are using for locating bearings with a tapered bore onto a cylindrical seating as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft.

When adapter sleeves are used on smooth shafts, the bearing can be located at any position on the shaft. When used on stepped shafts, together with an abutment ring, bearings can be accurately positioned axially and bearing dismounting is also facilitated.




Basic design
ADP adapter sleeves are supplied complete with lock nut and locking device. Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip. The sleeves are slotted and have an external taper of 1:12. ADP supplies–metric adapter sleeves, series designations H and OH–metric adapter sleeves for shafts with inch dimensions, series designations HA, HE and HS –adapter sleeves with inch dimensions, series designations SNW and SNPDesigns for hydraulic mountingMetric adapter sleeves To enable the hydraulic mounting to ease mounting and dismounting, metric ADP adapter sleeves having a bore diameter of 140 mm up to 500 mm can be supplied to special order already prepared for hydraulic mountings. In addition to these standard sleeves which are designated OH .. H and shown in the product tables, ADP produces sleeves to three other designs which differ in the number and arrangement of the oil ducts and distributor grooves.


Materials
The materials using in ADP adapter sleeves are carbon steel with a tensile strength at least 430N /mm2,
Dimensions
The dimensions of metric ADP adapter sleeves are in accordance with ISO 2982-1:1995; except the bore diameter of metric sleeves for inch shafts.The dimensions of ADP adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Tolerances
The bore diameter of metric ADP adapter sleeves is to tolerance JS9, the width to h15.The tolerances of ADP adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Thread
Metric ADP adapter sleeves up to size 40 have metric threads with 6g tolerances, according to ISO 965-3:1998. Larger adapter sleeves have metric trapezoidal threads with 7e tolerances, according to ISO 2903:1993.ADP adapter sleeves with inch dimensions up to and including size 64 (12 inch shaft diameter) have UnifiedSpecial Form threads (based on the old American National form, class 3 design). Larger sleeves have Acme Class 3G, General Purpose threads.
Shaft tolerances
Generally, the form tolerances must be kept within narrow limits as the accuracy of form directly affects the running accuracy of the bearing. shafts should be to an h9 tolerance but the cylindricity should be to IT5/2 according to ISO 1101:2004.